How to Charge a Airsoft Battery Without a Charger

While rigging a bombardment charger of whatsoever kind is non recommended, especially if you're not familiar with how electrical wiring works, at that place are ways to accuse an airsoft bombardment without a charger. Here are the elementary steps to follow:

Get a charger that matches the voltage of your airsoft battery. If you have an old wall-mounted charger that's not being used anymore but still works, they're the all-time options for this purpose.
Cutting the connector off and strip the wire for almost ⅜ of an inch. If you know how to attach alligator clips to the wires, practise it on the stripped wires.
Insert matching wires into the connector. The black wire on the charger should be inserted on the slot for the blackness wire on the battery. The aforementioned goes for the red wire. If your wires are stripped, you might need to record them in place.
Plug the charger in. Do not exit the battery while charging as information technology can be very unsafe to practise so. Unplug after an hour or 2 or an hour before the recommended charging time for your bombardment.

If your airsoft gun's battery charger stopped working, you can also purchase a smart charger for airsoft guns instead. They are sold separately and are much safer to use with manner amend performance.

Quick Navigation

1 Introduction
2 Materials Needed
iii How to Accuse Airsoft Battery without Charger
- three.1 Step i: Check the voltage of the wall-mounted charger.
- 3.two Step ii: Alter up connector caput of the charger.
- three.3 Step 3: Connect the charger to the battery.
- 3.4 Step 4: Plug in the charger.
4 Very Important Things to Recollect
- four.one Exist extremely careful when trying this project, especially if you're not experienced in working with electrical wiring.
- 4.2 Do non exit your setup unsupervised.
- 4.iii It's always best to just buy a replacement charger.
five Decision
half dozen Frequently Asked Questions
- 6.1 Is it OK to leave a battery on trickle accuse?
- half-dozen.2 Can a trickle charger charge a completely dead battery?
  - 6.2.1 Can I trickle charge 2 batteries at once?
- 6.three Tin I use a 5v charger with a iii.7 V bombardment?
- vi.4 Can I exit the battery charger on overnight?

Introduction

Compared to gas-powered airsoft guns, Automatic Electric Guns or AEGs tend to be more than convenient to use which can explain their popularity. However, AEG owners can however hitting a snag in case their accessories neglect. This is why some might exist interested in learning how to accuse an airsoft battery without a charger.

The straightforward solution to a non-functioning airsoft battery charger is actually very easy: just buy a new i. If chargers for your particular airsoft gun are not sold separately, smart chargers will exist neat alternatives and might even be better for your battle machine.

Still, if chargers are not sold locally and yous tin't await a few days for the new charger to arrive, a DIY fix is possible. It will practice the fob of powering upward your battery but a lot of caution is brash.

If yous're not skilled in handling electric wires and if yous don't accept the proper tools for the chore, information technology's best to skip this birthday and wait for your replacement charger to arrive. If you're familiar with electric wiring, however, this guide might be able to assist you out.

Materials Needed

These are what yous need to create a homemade charger for your airsoft gun battery:

A wall-mounted charger with the same voltage as your battery. An old one that'southward not existence used anymore would be ideal for this chore.
Alligator clips and crimping tool, if y'all take any. Electrical tape, if you lot don't.
A pair of wire strippers or diagonal pliers.
A pair of scissors.
A multitester.
Your airsoft gun battery.

How to Charge Airsoft Battery without Charger

These steps will assistance yous charge an airsoft bombardment without a charger:

Step 1: Bank check the voltage of the wall-mounted charger.

To ensure that it's a good match for your battery, check if it'south still working or if it has the aforementioned voltage as it might indicate in its label. To do this, you'll need a multimeter. Plug in the charger into a power outlet and turn the multimeter on.

Take hold of the red (positive) probe and so stick into the inside of the connector then take the black (negative) probe and affect its metal tip on the barrel. The multimeter should then show the reading of the voltage that'southward coming out of the charger. If that matches your battery, you can employ it for charging.

Stride 2: Modify upward connector head of the charger.

Your charger will most likely have a connector that is non compatible with the connector used by airsoft gun batteries then information technology's necessary to replace them. To exercise this, you tin can either merely strip the wires and expose the metal part inside or take the actress step of attaching alligator clips on them.

Firstly, cut off the connector head of the charger then strip its outer coating by making a small cut on the plastic then pulling it out. This should expose two (or more than) thinner wires. You volition only need to piece of work with the black and reddish wires so cut out the others if at that place are any and then strip them of their plastic covering until the metal wire is exposed.

If you take alligator clips, yous can adhere them to the wire using a crimping tool or your pliers. If you lot don't, you tin can go out the wire as is or even attach a uniform connector to it.

Step iii: Connect the charger to the bombardment.

If you took the extra steps and replaced the old connector of your charger with one that works with your airsoft gun battery, you lot can merely connect the 2 items together.

If you used an alligator clip, you need to insert one prong into the connector head and prune information technology like and then. Make sure that the metals of the charger and the battery connector are touching just admittedly avert making the two alligator clips touch each other when plugged in.

If you have blank wires, yous can simply insert it into the connector until the metal wire touches the metal within the connector. You lot can tape it up to secure the connection.

Whatever method you choose, make sure that the same polarity: negative to negative, positive to positive. Any mistake can harm your battery.

Pace iv: Plug in the charger.

Start charging. Proceed an eye on your rig, still, equally at that place are dangers in using a DIY charger.

Very Important Things to Remember

Caution is of utmost importance when working with electricity, and so make sure to keep these in mind:

Exist extremely careful when trying this project, especially if you're non experienced in working with electric wiring.

Working with electric components is very dangerous. If you're not knowledgeable and experienced in the area, it's not recommended that you effort tinkering with electrical stuff.

Practice not go out your setup unsupervised.

If you managed to create a charging rig based on the instructions above, practice not leave it unsupervised. There are no safety features in the setup then accidents can happen.

Information technology's e'er best to simply purchase a replacement charger.

If you can purchase a replacement battery charger, it'south better to practice so than trying to rig a fashion to charge an airsoft bombardment without a charger.

Decision

With the right skills and knowledge, it'south non that complicated to create a way how to accuse an airsoft battery without a charger. However, in that location are dangers involved in the process and then it'southward not recommended to endeavour it without a lot of thought and expertise.

Hopefully, the instructions above were able to detail the process of creating an alternative charger for airsoft batteries. If you have boosted insight, do leave them in the comments. If you found this tutorial helpful, make sure to share it so your friends tin can learn a affair or ii from it, too.

Frequently Asked Questions

Is it OK to leave a bombardment on trickle accuse?

Trickle charging can seem like a fuss-free manner to go on your airsoft batteries in total accuse only it has quite a number of dangers. This is extra truthful for some types of batteries like LiPo as they cannot absorb overcharge. So to be on the prophylactic side, it might be better to try other ways to height up your bombardment levels.

Can a trickle charger charge a completely dead bombardment?

It depends on the type of battery you're using. Information technology might do the play a trick on but the results volition have a while.

Can I trickle accuse ii batteries at once?

Yep, it'due south possible.

Can I use a 5v charger with a 3.seven Five battery?

Information technology depends. If there'south no regulation betwixt the charger and the battery, the 5V output tin can be too much for the battery. For devices, still, this might be doable.

Tin I exit the battery charger on overnight?

Information technology's not recommended to exit your airsoft battery plugged in overnight.